Four side moulder for woodworking

Features: 1) Reasonable prices 2) High quality 3) Working width 25-300mm 4) High speed(Feeding speed:7-28m/min) - STANDARD CONFIGURATION:- This adopts step-less material feeding, material feeding speed ranges from 7m/min to 28m/min.- Each principal axis adopts independent drive to electric motor, features stronger cutoff force.- Adjusts for principal axis integrates at central or frontal side, features easy operation.- Galvanized workstation features superior abrasion resistance.- Equips with auxiliary unit alarming lack of material, it effectively improves smooth feed-in while lack of material.- Active roller below improves feeding efficiency.- Pneumatic pressing feeding roller section by section adjusts for pressing force, it favors for smooth feed-in of different thicknesses of timber.- Adopts central charging system, features convenience and promptness.- Equips with world-class electric element, features superior stability.- With fully sealed safety protective cover, this effectively avoids flying logging debris and noise blocked, and even acts as safety protection.

Machine Parameter		Horizontal Lifting	0.75KW/1HP
Working Width	25-300 mm	Feeding Motor	5.5KW/7.5HP
Working Thickness	8-150 mm	General Power	54.75KW/73HP
Working Table Length	1950 mm	Cutter Diameter /mm
Feeding Speed	7-28 m/min	1st Lower Shaft	φ125 mm
Main Shaft Diameter	φ40 mm	Right Vertical Shaft	φ125~φ180 mm
Main Shaft Revolution	6000 r/min	Left Vertical Shaft	φ125~φ180 mm
Pneumatic Source Pressure	0.6 MPa	1st Upper Shaft	φ125-φ180 mm
Motor Power		2nd Upper Shaft	φ125-φ180 mm
1st Lower Shaft	7.5KW/10HP	2nd Lower Shaft	φ125-φ180 mm
Right Vertical Shaft	7.5KW/10HP	Remarks/mm
Left Vertical Shaft	7.5KW/10HP	Feeding Wheel Diameter	φ140 mm
1st Upper Shaft	11KW/15HP	Dust outlet Diameter	φ140 mm
2nd Upper Shaft	7.5KW/10HP	Physical Dimension	4168×1635×1735 mm
2nd Lower Shaft	7.5KW/10HP

Four side moulder for woodworking